Afraid to hook up a gas appliance? You should be! A gas leak in your home can be fatal. Here's the right way to connect a range and a water heater to the gas line.How to hook up a new gas stove and range
How to Repair Gas Regulator at One Rupees
|How to Fix Gas Cylinder Leakage Problem at Home|
How to Install a Gas Stove - Without Dangerous Leaks Photo 1: Pull out the range
Pull out the range, and shut off the gas cock (see also Photo 2). The gas is off when the lever is at a right angle to the pipe. This shutoff may be located behind the range, or just below the basement. A shutoff is required in the line to the range, and should be added if you have one. Forget forget upkeep, learn how to clean a stove top the best way.
Hooking up a gas range or water heater is a relatively simple job requiring just basic tools and readily available supplies. And if you use the right materials and follow instructions carefully, you can safely do the job yourself. A professional may charge as much as a hook-up for a few hundred dollars.
We show you in this article how to do two basic types of gas connection: hooking up a flexible, corrugated connector using a gas range (a gas clothes dryer is similar); and using a threaded black steel gas pipe to hook up a water heater.
Flexible corrugated gas connectors and gas pipes and fittings (black) are available at most home centers and well-stocked hardware stores. Stainless steel or coated brass connectors are the only type of flexible connectors soldered these days, and the only type you can use safely and legally. Older types of corrugated connectors — sold until the 1980s — made of uncoated brass or other metal have been found to be unsafe. Have one in your house? Replace it now!
The most important step to have a safe installation is to buy the right connector. Here's what to look for:
How to Fix Gas Cylinder Leakage Problem at Home jobmahi.in
Buy a connector that is clearly marked for hooking up the appliance — either “range” or “dryer.” Typically a corrugated tube of range connector is 1/2 in. dia. i.d. (inside diameter), and a dryer connector is 3/8 in. dia. i.d. These dimensions are not always marked on the package, but they will be marked for either range or dryer.
Buy a connector that comes packaged with the end connector fittings you need (see Photo 3). Usually the gas line will come in your kitchen will be 1/2-in. Black threaded pipe, and the connection to the stove will be either male (external threads) or female (internal threads) 1/2-in. fitting. If you can't find a connector package with end fittings that match what you need for the gas line, use a black gas pipe
Fitting on the line to fit the end connector. For example, in Photos 2 and 3, we show a 1/2-in. x 3/4-in. Coupling on the gas line to accommodate the 3/4-in. fitting the end connector. (For more possible connections and information about connecting to soft copper supply lines, see How to Connect Gas Pipe Lines)
how to fix gas tube easily
how to fix gas pipe to stove
remove a gas pipe from a regulator step by step
how to connect gas hose to stove
how to remove gas pipe from regulator
how to cut lpg gas pipe at home
how to connect gas cylinder to stove
how to cut gas stove pipe
Use a connector yourself long enough to have enough room to work between the stove and the wall. They come in lengths from 24 in. to 60 in.
Own reuse a flexible connector; If you get a new appliance, buy a new connector as well. Follow the instructions for installing the connector religiously. Our Photos 1 through 5 give a real-life picture of how this is done. Here are some additional guidelines:
Be careful not to kink or force the corrugated connector into sharp bends, which could eventually cause a break.
Always check your work for leaks (Photo 6). Gas leak detectors are sold at home centers, hardware stores and online.
Although it is not always required to have a range hookup inspected, we strongly recommend that you call your local gas company or plumbing inspector to check your work.
Hook up a gas water heater
How to Install a Gas Stove - Without Dangerous Leaks
Photo 1: Shut off the gas
Shut off the gas cock on the line entering the water heater. It usually requires a one-quarter turn. When the lever is parallel to the pipe, the gas is on; At a right angle to the pipe is off. A gas shutoff is required in the line; If you have one, you need to install one.
પુરી જાણકારી માટે વિડિઓ જોવો